November 28-30, 2017
Torino, ITALY

The 6th international business convention for the aerospace industry in Torino


November 28-30, 2017
Torino, ITALY

The 6th international business convention for the aerospace industry in Torino

Event format

Aerospace & Defense Additive conferences and thematic workshops 

Wednesday November 18th, 2015


 HOURS  CONFERENCES  ROOM
09:20 - 09:50   Thales Alenia Space Suppliers - partnership for cost optimization Aerospace Room
Thales Alenia Space, Paolo Pezzella, Purchasing TAS Italia DirectorDownload the presentation  
The Supply Chain in Thales Alenia Space is evolving in order to meet the expectations of a space market more and more mature for both commercial and institutional applications. Creation of strategic sourcing and solid partnerships with innovative suppliers as well as a reliable vendor’s network are key factors to meet market expectations and costs optimization. The presentation mainly focuses on the key steps to become a TAS supplier. A quick view of the main ongoing projects depicting the role of TAS Supply Chain will be provided during the conference.  
   
09:55 - 10:50   Outlook of the Turkish Aerospace Industry Aerospace Room
Turkish Aerospace Industry (TAI), Halil Attila, Chief/Subcontracting, Trainer and Special Mission Aircraft Director  
TAI is Turkey's center of technology in design, development, modernization, manufacturing, integration and life cycle support of integrated aerospace systems, from fixed and rotary wing air platforms to UAVs and satellites. Within the scope of more than 170 different Projects, TAI makes its business starting with conceptual design thru final delivery of end-items to its customers, including potential solution alternatives and cost to support variable budgets for developing Indigenous platforms in Turkey.TAI continuously searches around the world for dependable subcontractors/suppliers with niche technologies to be utilized in its projects for the Aerospace platforms. Therefore, the Supply chain management becomes an important role player because it leads the role of outsourcing systems and major airborne equipment needed for these projects.  
   
   How to do business with TEI? How to become subcontractor  
Tusas Engine Industries (TEI), Emre Dalak, International Sourcing Engineer  
   
    Joint presentation of OSSA and SSM on Turkish Aerospace market  
SSM, Bilal Aktas, Head of Industrialization, Under Secretary for defense industries
OSSA, Hilal Unal, Cluster Coordinator, Aerospace and Defense cluster of Ankara
 
Presentation of the Aerospace and Defense cluster, capabilities and future projects by Ossa cluster and investment & Cooperation Opportunities in Turkish Defence & Aerospace Market”. Presentation of the general structure of Turkish Procurement System in defence and aerospace and ongoing defence projects which will be summarized from the international cooperation point of view by SSM.  
   
11:05 - 11:35   Stelia Aerospace Presentantion Aerospace Room
Stelia Aerospace, Jean- Francois Michaud, Head of Global and Leading Competitive Countries Sourcing  
Stelia company presentantion and procurement strategies.  
   
11:40 - 12:10   Strategies for the development of additive manufacturing at Politecnico di Torino AIDAA Room
Politecnico di Torino, Paolo Fino, Professor  
Nowadays additive manufacturing is one of the fundamental topics of the so called Industry 4.0 allowing production outsourcing for the globalized market. Politecnico di Torino and IIT@Polito exhibit a strong experience in the additive manufacturing field thanks to the first partnerships started in 2005 with big international aerospace enterprises settled in Piemonte region.  
   
11:40 - 12:10   Sourcing: Readiness to support Market needs Aerospace Room
Avio Aero, Stefano Barone, Strategic Sourcing Leader  
Expectation AA has in order to satisfy Customer demand:
  • Capacity
  • Capability
  • Increasing competitiveness
  • Efficiency on cost
  • Proactivity in cost reduction proposals
  • Flexibility in meeting demand and immediate changes
  • Future is the next 5+ years, what is there to come?
 
   
12:15 - 12:45     Round Table - Q&A Verticalization: towards a successful business strategy with Piedmont Aerospace Players Aerospace Room
   
12:15 - 12:45 The Italian and European associative experience in Additive Manufacturing: AITA & CECIMO AIDAA Room
UCIMU-SISTEMI PER PRODURRE , Enrico Annacondia, Technical Direction
CECIMO, Giorgio Magistrelli, Additive Manufacturing Project Manager
 
Founded in 2014 as a spin-off of UCIMU-SISTEMI PER PRODURRE (Association of Italian Manufacturers of Machine Tools, Robots, Automation Systems and ancillary products), AITA-ASSOCIAZIONE ITALIANA TECNOLOGIE ADDITIVE represents around 100 stakeholders working in the field of Additive Manufacturing, in order to underline the link between the Italian Manufacturing sector and these technologies. CECIMO is the European Association of the Machine Tool Industries, we bring together 15 national associations of machine tool builders, which represent approximately 1500 industrial enterprises in Europe, over 80% of which are SMEs. CECIMO defends the common interests of its members, particularly in relation to authorities and associations, and promotes the European machine tool industries and their development in the fields of economy, technology and science.  
   
12:50 - 14:00  Lunch Break  
   
14:00 - 14:30   Torino Piemonte Aerospace: Cluster Aggregation Activities with a focus on Additive Manufacturing Aerospace Room
CeiPiemonte, Erika Manis, Technical Development  
Cluster Aggregation Activities with a focus on Additive Manufacturing.  
   
14:35 - 15:05   Electromechanical Rotary Actuator for Hybrid Flight Control Systems (HFCS) Aerospace Room
MAG Mecaer Aviation Group, Viviana Bruno, Project EngineeringDownload the presentation  
The Fly By Wire (FBW) flight control mode as of today is uneasy for being used on small aircraft like basic trainers and Very Light Jets (VLJ), due to its intrinsic complex and expensive architecture. Mecaer is developing a concept solution that shall make FBW more compatible for said applications. The initial step requires the development of basic components like a suitable electromechanical actuator. In this aim the development of a rotary electromechanical actuator has been completed in the frame of the POR FESR program funded by Regione Piemonte.  
   
15:45 - 16:50   Strategic Debate: The future of R&D, industry and innovation in the italian aerospace Plenary Room
FINMECCANICA Group, Mauro Moretti, CEO  
   
16:55 - 17:25   Additive Manufacturing Towards Space Applications Aerospace Room
Aviospace, Emanuele Pensavalle, Head of Program Office  
Qualification guidelines for a new market approach. Advantages, Market applications and qualifications procedures of AM technologies since their introduction.  
   
16:55 - 17:25   Materials development produced by Selective Laser Melting for aerospace applications AIDAA Room
Politecnico di Torino, Elisa Ambrosio, Diego Manfredi, IIT, Researchers  
Selective Laser Melting (SLM) process and technology as a technique creating parts by scanning powdered materials with a laser beam so as to melt and fuse the material into a solid, the parts being manufactured layer by layer direct from the CAD file data. This approach permits to extend the freedom of design and manufacture by allowing, for example, to create an object with desired shape and internal structure in a single fabrication step.  
17:30 - 18:30   Piedmont regional politics in the support of aerospace industry TBA
Piedmont Aerospace District & Piemonte Region, Tommaso Dealessandri, President  

Thursday November 19th, 2015


 HOURS  CONFERENCES  ROOM
09:20 - 09:50    Product Lifecycle Management opportunity for enabling Engineering collaboration AIDAA Room
PLM systems, Roberto Cavarero, Practice Manager - Area ETO (Engineering to Order)  
It is widely accepted that PLM represents a competitive edge for manufacturing enterprises. Time-to-market reduction and increased reactivity to market's demand are PLM most known fall-outs. A local project on aerospace and defense sector demonstrates a substantial interest on Export Control issues and CAT management regarding PLM opportunities. Authors deal with the problem analyzing reasons and solutions, thus highlighting and clarifying PLM advantages in the enterprise context. The first step towards the development of such solution is the enterprise model proposed in the paper.  
   
09:20 - 09:50    MESAP Innovation Cluster of Piedmont Region: a focus on aerospace and additive manufacturing skills and competencies Aerospace Room
Mesap, Paolo Dondo, Technology ManagerDownload the presentation  
Aerospace and additive manufacturing skills and competencies.  
   
09:55 - 10:25    New methods and tools to design optimal structures for additive manufacturing Aerospace Room
Altair Engineering srl, Giulio Turinetti, Hyper Works Aerospace Application EngineerDownload the presentation  
The rapid progress in additive manufacturing (AM) technologies enlarge very significantly the range of possible applications. But this enforces also the need to have a suitable engineering process to design efficient products specifically for AM. The topology optimization technologies are particularly well suited as they help design the optimal and lightest structural shapes, leveraging the full potential of AM. This presentation will explain the engineering process and showcase some industrial applications.  
   
09:55 - 10:25    3D Simulation and Multidisciplinary Design Space Exploration in Aerospace and Defense AIDAA Room
CD-adapco, Anthony Massobrio & Carlo Pettinelli, Sales Managers  
3D engineering simulation is becoming more than just an advantage - it is a necessity. No longer confined to "analysis" at the later stage of the development process, thermal/flow/stress 3D simulation can and should be applied as a tool from the very beginning of the design process.  
   
10:30 - 11:00    Modern Metalworking Fluid for sophisticated machining processes. How to generate a saving in the machining process, extending the coolants and the tools life Aerospace Room
Fuchs Lubrificanti, Giovanni Caula, Product Manager MetalworkingDownload the presentation  
How to generate a saving in the machining process, extending the coolants and the tools life. To achieve the finishing, required by the modern Aircraft industry, the combination between: Tools, Coolant and the feeding system is mandatory. Different coolant types and the feed pressure can influence remarkable the machining process on Titanium and Superalloys.  
   
11:05 - 11:35    DESIGN FOR ADDITIVE MANUFACTURING (EBM Technology)-Topological optimization of a satellite support in Titanium Aerospace Room
Poli shape, Arnaud Martin, Chief Executive Officer  
Materials development produced by selective laser melting for aerospace application.  
   
11:40 - 12:40    Thales Alenia Space Developments and Strategies in Space Exploration Systems and Technologies Aerospace Room
Thales Alenia Space, Piero Messidoro, Chief Technical OfficerDownload the presentation  
Torino site of Thales Alenia Space (TAS) is the company centre of excellence in Space Exploration and Science missions. From the International Space Station to the exploration of Moon, Mars and the other solar system planets the role of TAS is at the forefront of the global initiatives including significant achievements, in progress developments and future challenges in system concepts and technology innovative solutions. In this context the cooperation with Academies and Small Medium Enterprises is of primary importance.  
   
12:40 - 14:00  Lunch Break  
   
14:30 - 18:30  Space Trips Workshop Aerospace Room
Thales Alenia Space, Eleonora Zeminiani, Thermal Engineer